Majin Vegeta Shadow Lamp
Print Profile(1)
Description
Hello!
I present to you a new shadow lamp.
In this new version, it can be used with a USB cable, just like the previous ones, but I also designed it for a battery holder, to incorporate a switch, and it has a slot for hanging it.
If you would like a lamp of any other character, please let me know in the comments.
Boost Me (for free)
You can also support me
In my case, I used an E10-type bulb from Amazon, but to prevent the light from the dual LED from creating a double shadow, a printed socket must be used to cover the top line of the LEDs. I will attach the file in the coming days once I fine-tune it.
The bulb used:
https://www.amazon.es/gp/aw/d/B0DQL3GBKW?psc=1&ref=ppx_pop_mob_b_asin_title
This same model is cheaper on AliExpress. To use it with a USB cable, you should use the 6V version; for use with batteries, you should use the same model but in 3V.
The battery connection would look like the following image:
If using USB, the cable passes through the pillar and comes out through the slot in the battery holder.
I simply cut an old USB cable and soldered the red wire to the tip and the black wire to the thread. The bulb is 6V, so a USB cable supplying 5V, connected to any power bank or phone charger, will work perfectly.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (27)