HERO VILLAINOUS TWEEZERS

🎨 Paint Your Herome Challenge is live!

Join our May painting contest: print and paint one of my models, share your finished work, and you could win a €40 voucher

To participate, enter our Discord server and look for the contest section:

paint-your-herome-challenge

👉 Click on the image to join the contest!

Grab your brushes… the painting war has begun. 🔥

So many of you are messaging me asking where my old models have gone.

I’m trying to reply to everyone, but I’ll say it here too: unfortunately, several of my models are being removed from the platform.

So my advice is very simple:

if you like a model, download it NOW.

Don’t just add it to your collection, because in a few days it might be too late… and then come the tears, the regrets, and the classic “damn, I should have downloaded it when I had the chance.”

You’ve been warned. The rest is in the hands of the 3D printing gods. 😄

GARA'S WORKSHOP

I am a dad of two beautiful daughters and I enjoy introducing them to the multiverse through 3D Printed nerd objects

This is one of the models from my small 3D printing workshop
I enjoy designing, testing, and sharing these figures with those who love to print, paint, and collect miniatures

I am a big Bambu Lab fan and all my prints are made mainly with P2S and A1 mini

Before publishing a model, I always do several test prints to check stability, supports, and overall quality

Click here to join my Discord group: every now and then we have evening live streams to talk about 3D printing, projects, tests, and new ideas to develop together.

AND ALSO CHECK OUT MY PROFILE INSTAGRAM

------------------------------------------------

RECOMMENDED PRINT SCALE

I often make test prints on a reduced scale (about 10 cm) to check the model's behavior

But there's something important

If you print it larger, around 15 cm, in addition to gaining detail, you also gain ease of printing

My advice:
enlarge it as much as you want, but add some extra supports where needed

Proof that the model prints correctly is in the actual photos in the post

Only basic slicing knowledge is needed

If you have any doubts, feel free to write to me: if I can help, I always do so gladly

------------------------------------------------

PRINT PARAMETERS USED FOR TESTS

Test scale: about 5 cm

PLA Basic white
Layer height: 0.16 extra fine
Supports: hybrid tree
Outer brim: 10 mm
Object spacing: 0 mm

If you want to give a small buff to this nerd project, you can do so with a contribution on PayPal here.

Or, if you want to help out, you can boost the server and support the community.

------------------------------------------------

SUPPORT REMOVAL

The supports are designed to be quite delicate

They can be removed without damaging the model, but calmly:
one at a time, slowly, using tweezers and a bit of patience

No need to go Rambo on the supports…
otherwise something breaks and you end up crying in front of the 3D Printer

------------------------------------------------

TECHNICAL NOTES (the truth, not poetry)

I prefer to print figures in single color and paint them after priming using acrylic markers or miniature painting techniques

The colored images on the cover are only examples of coloring generated with AI to show possible painting styles

The final result always depends on the personal taste of whoever paints the model, I apologize for some imperfections and slight differences between the real model and the AI model, I still need to perfect the method!!!! in all cases you have my photos, both with and without supports, as a reference for the 3D Printed model!!!

The design originated from an AI generation (Tripo), subsequently refined manually and tested with FDM printing to ensure real printability

The real printing photos are the monochrome white or gray ones in the gallery

------------------------------------------------

THE PART THAT DECIDES IF YOU PRINT OR CURSE

Bed adhesion

I use CryoGrip Pro Frostbite and the adhesion is so strong that the prints seem to have taken out a mortgage on the printing plate: they never detach

I mainly use Bambu filaments and have no problems

If you use a different setup:

• first and foremost, focus on bed adhesion
• use dry, quality filament
• keep the printing plate perfectly clean
• don't be afraid to use brim or extra supports

With these precautions, printing becomes much simpler and more reliable

------------------------------------------------

THE HEROME COLLECTION

If you like this model, you can find all the other figures in the collection here:

https://makerworld.com/en/@Gara/upload

But beware…

if you start printing them, you'll end up wanting them all

If you like the model, leave a like, it really helps the project grow