Search models, users, collections, and posts
Eyepiece Holder Skywatcher Pier
IP Report
Print Profile(2)
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
53.4 h
2 plates
0.2mm layer, 2 walls, 15% infill
Designer
6.5 h
1 plate
Open in Bambu Studio
Boost
0
0
0
0
1
0
Released
Description
Content has been automatically translated.
The eyepiece holder is designed for the Skywatcher telescope pier with a diameter of 10.25cm, but the pier's width can vary slightly and may need adjustment. The holder is designed so that it can also be mounted over the pier extension. It includes a tray for 2" eyepieces and the sleeves are closed at the bottom so that the eyepieces can be stored permanently. Mounting is done with screws an M5 bore is included in the model. I printed the holder with fiberglass-reinforced ASA
I have now uploaded another version with a 10.2 diameter and an additional 2" eyepiece holder
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)