Boka

X2D Retraction Test PETG 1-5mm

AlphaPanda

X2D Retraction Test ABS 1-5mm

PrintsbyKevin

cover

plate_1.png

Image - 2026-04-16T130937.280.jpg

X2D Retraction Test PLA 1-5mm

X2D Retraction Test TPU for AMS 1-5mm

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

<h2>Retraction-Test (1,0 mm – 5,0 mm) für PLA, PETG, ABS</h2><p>Diese Projektdatei dient zur Ermittlung des optimalen Rückzugswegs (Retraction) für verschiedene Filamente. Der Test ist so vorbereitet, dass man lediglich das entsprechende Materialprofil auswählen muss, um den Druck zu starten.</p><h2>Funktionsweise des Tests</h2><p>Der Testzylinder erhöht den Rückzugsweg kontinuierlich mit zunehmender Höhe.</p><ul><li><strong>Startwert:</strong> 1,0 mm (am Boden des Modells)</li><li><strong>Schrittweite:</strong> Pro markiertem Strich an der Seite des Zylinders erhöht sich der Rückzug um <strong>0,1 mm</strong>.</li><li><strong>Endwert:</strong> 5,0 mm (an der Spitze des Modells)</li></ul><p>Durch diese feine Abstufung lässt sich der Punkt, an dem das Stringing aufhört, sehr präzise bestimmen.</p><h2>Durchführung</h2><ol><li>Wähle das passende Profil für dein verwendetes Material (<strong>PLA, PETG oder ABS</strong>).</li><li>Starte den Druck.</li><li>Werte das Ergebnis nach dem Druck aus: Der optimale Wert ist die unterste Markierung, an der keine Fäden (Stringing) mehr zu sehen sind.</li></ol><h2>Auswertung</h2><p>Wenn das Stringing beispielsweise genau am fünften Strich über der 1-mm-Basis aufhört, entspricht dies einem optimalen Rückzugsweg von 1,0+(5×0,1)=1,5 mm.</p>

<h2>Retraction Test (1.0 mm – 5.0 mm) for PLA, PETG, ABS</h2><p>This project file is used to determine the optimal retraction distance for various filaments. The test is prepared so that you only need to select the corresponding material profile to start the print.</p><h2>How the Test Works</h2><p>The test cylinder continuously increases the retraction distance with increasing height.</p><ul><li><strong>Start Value:</strong> 1.0 mm (at the bottom of the model)</li><li><strong>Increment:</strong> For each marked line on the side of the cylinder, the retraction increases by <strong>0.1 mm</strong>.</li><li><strong>End Value:</strong> 5.0 mm (at the top of the model)</li></ul><p>This fine gradation allows for very precise determination of the point where stringing stops.</p><h2>Procedure</h2><ol><li>Select the appropriate profile for your chosen material (<strong>PLA, PETG or ABS</strong>).</li><li>Start the print.</li><li>Evaluate the result after printing: The optimal value is the lowest mark where no strings (stringing) are visible.</li></ol><h2>Evaluation</h2><p>For example, if stringing stops exactly at the fifth mark above the 1 mm base, this corresponds to an optimal retraction distance of 1.0+(5×0.1)=1.5 mm.</p>

X2D Retraction Test PLA, PETG, ABS, TPU

ASIA

Print Profile(4)

Description

Retraction Test (1.0 mm – 5.0 mm) for PLA, PETG, ABS

How the Test Works

Procedure

Evaluation

Comment & Rating (2)

License

Related Models