Print Profile(2)
Description
Another version of the Lightbox collection with a Harley-Davidson design.
More versions of the Harley lamps:
If you have already printed the box, you can just print the HueForge and simply swap it.
HueForge settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x100mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm
#e2dedb PLA PolyLite White Transmission Distance: 5
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#080a0d PLA PolyLite Black Transmission Distance: 0.3
This print uses 3 unique filaments
Swap Instructions:
Start with White
At layer #12 (1.04mm) swap to Red
At layer #24 (2mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)