Universal Guitar Wall Mount (No Supports) - Free 3D Print Model

Search models, users, collections, and posts

Matthew_Chvojka

Hobby & DIY>Music

IP Report

Print Profile(1)

All

P2S

X2D

P1S

H2D Pro

A2L

X1 Carbon

P1P

A1 mini

X1E

H2S

H2C

H2D

0.2mm layer, 3 walls, 15% infill

Designer

3.9 h

1 plate

4.9(19)

Open in Bambu Studio

Boost

330

1098

550

319

Released

Description

Keep your instruments safe and stylishly displayed with this sturdy, minimalist guitar wall mount. Designed with durability and ease of printing in mind, this mount is a reliable choice for any musician.

Key Features:

Print with Confidence: Engineered for maximum strength. You don't have to worry about your instrument falling—this mount is built to last.
Support-Free Design: Optimized geometry allows you to print this model without any supports, saving you time and filament.
Universal Compatibility: One mount for all your gear! It is suitable for:
- Acoustic Guitars
- Electric Guitars
- Bass Guitars
Sleek Aesthetics: A clean, modern look that fits any room or studio decor.

The only way to fit a classical guitar is to turn it around (fretboard facing the wall). Usually you want to see the front of your guitar, but it works.
Maximum neck size is 55mm. If yours is bigger than that, you can try to scale it in the slicer.

Recommended Print Settings:

Material: PETG (recommended for durability) or ASA.
Walls/Perimeters: 3–5 (Crucial for the strength of the arms).
Infill: 15% Gyroid.
Infill Multiline: 2 (This significantly reinforces the internal structure).
Supports: None – designed to print cleanly without them.

Comment & Rating (38)

@andrewguisgand

amazing print looks super clean on the wall thanks 🙏

(Edited)

The designer has replied

@Matthew_Chvojka

thank you 🤟 awesome guitar btw🤩

@andrewguisgand

Replying to @Matthew_Chvojka :

I’m printing a second one now. Also thinking it’s going to make a good Holiday gift for the fam. thanks again. it’s a PRS Zach Myers love this guitar just needs a few mods to get it up to par.

(Edited)

@dev_del4

Print Profile

0.2mm layer, 3 walls, 15% infill

Sleek and sturdy. 100% would recommend. Extremely happy with how it turn out. (1st print btw)

The profile uploader has replied

@Matthew_Chvojka

Thank you 🤟 Looks great 🤩

@AngryBurrito

Print Profile

0.2mm layer, 3 walls, 15% infill

works perfectly!

The profile uploader has replied

@Matthew_Chvojka

thank you 😉🤟

@yomamasnuggets

Print Profile

0.2mm layer, 3 walls, 15% infill

turned out perfectly. printed in dark gray petg. thank you so much. I have wanted to put this guitar on a holder on the wall for years but couldn't make myself buy an expensive wall mount.

The profile uploader has replied

@Matthew_Chvojka

Looks great 🤓🤟 thanks for rating and sharing...I'd have the walls covered in guitars if I had them and if I could, but my wife is already worried about the dusting! 🫣😅🤟

(Edited)

@nlfenlason

Print Profile

0.2mm layer, 3 walls, 15% infill

easy print! Love it for my swords!

The profile uploader has replied

@Matthew_Chvojka

Swords? That's great to hear that it has other uses. Can you send a photo with the sword please? 🤓🤟

@Matthew_Chvojka

I also need to share a photo. BTW, thanks for the rating and especially for sharing the photos. When I designed this for me and my students, I didn't realize the awesome thing—that you would be sharing photos of your beautiful guitars. Awesome. Thanks! 😉🤟

@dr.klightsey

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

This bracket printed amazingly well just like it is! I wouldn't change a thing... my son is going to love them! Thanks! 👏❤

The profile uploader has replied

@Matthew_Chvojka

Thanks....I am Happy to hear that 🤓🤟 It takes a little grip with different types of guitar necks, but it should hold in place while they are hanging. 😉🤟

(Edited)

@dr.klightsey

Boosted

Replying to @Matthew_Chvojka :

Just boosted ya! ❤️ Keep creating! ☮️

@Matthew_Chvojka

Replying to @dr.klightsey :

Thank you so much 🤩🤓🤟I will

@Jonhy_T

Hello! How is it going with PLA

The designer has replied

Show original

@Matthew_Chvojka

Yes. I already printed some with PLA and it works fine. I am just more careful 😉

@Jonhy_T

Replying to @Matthew_Chvojka :

thanks!

@Muzogitar

Works great for electric guitars, but unfortunately not for classical guitars. The angle of the headstock near the tuning pegs prevents the guitar from fitting properly.

The designer has replied

@Matthew_Chvojka

Hi. Thank you for the comment. I didn't have a classical guitar to try – that’s why I wrote in the description: Acoustic Guitars; Electric Guitars; Bass Guitars. I did not mention classical guitars there. I will make it more specific. Sorry for your trouble, mate. The only way to make a classical guitar fit is to turn it backwards, with the fretboard facing the wall. Of course, you usually want to see the front of your guitar, but it works! A mate of mine with a 4/4 classical guitar stopped by and it fit that way – see the photo.

@pk01

Print Profile

0.2mm layer, 3 walls, 15% infill

goodddddddd

The profile uploader has replied

@Matthew_Chvojka

thaaaanks 😁🤟

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.