4x4 Explorer Kit for Mini Off-Roader

Many accessories for the 4x4 Mini Off-Roader!

Such as…

• Functional floodlights
• Functional winch
• Sporty seats
• Storage container
• Off-road wheels
• Body design
• Jerry can
• Windscreen

Seamless operation with one controller, no switching needed. Use the original cyberbrick controller to seamlessly control 2 receiver modules. One receiver operates the two driving motors and the floodlights, the other receiver operated the winch and front headlights. 

Includes detailed assembly instructions. To make it easier to get started, I made sure to only use the same screws supplied with the cyberbrick hardware kits. If you already have build the 4x4, you can reuse the steel dowels and the majority of the same parts, such as the wheels, body, and mechanics. Only a few more electronics are needed to build this.

The battery removal is easy as you only need to remove the two pins. Then you can lift out both batteries for charging.

The 150 rpm motor provides lots of torque for the winch. The car can pull itself!

What parts are needed? 

All the items you need to build this kit are listed in the instructions. This assumes that you have already build the original 4x4 Mini Off-Roader. 

BUT: It's recommended you purchase the Cyberbrick Standard Car Kit (ZK006) and then get: The 150 rpm N20 motor (LA002), MR128ZZ bearing (EA004), D2 2x12 stainless steel dowel pin (DA009), and a 200 mm 3Pin SH1.0 wire (XC015) for easier battery removal. There should be leftover pins from building the original 4x4 though. This will save you more and give you lots of leftover parts for other projects.

Here's some close-ups:

Winch

 Floodlights and seats

Body designs (optional graphics)

Storage box and can

Wheels (optional bolt colouring)

And some demos!

I hope you enjoy building this. Ask any questions or for help.

Updates:

27/04/2026 : Changed orientation of Grille H so front has a better finish.