Mega Houndoom Infernal Base - Free 3D Print Model

Search models, users, collections, and posts

Dommivat

Miniatures>Creatures

IP Report

Print Profile(1)

All

H2C

X1 Carbon

H2D Pro

H2S

H2D

P1S

X2D

P2S

A1 mini

X1E

P1P

A2L

0.2mm layer, 2 walls, 10% infill

Designer

3.6 h

1 plate

4.3(3)

Open in Bambu Studio

Boost

274

727

116

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

Description

Boost Me (for free)

I put a lot of effort into testing and optimizing the supports for this print profile to ensure a clean finish. If this model prints perfectly for you, a Boost is greatly appreciated and helps me keep creating! 🚀

A powerful Houndoom diorama surrounded by hellfire and skeletal details, designed to capture its dark and aggressive presence. The composition emphasizes motion and intensity, with flames wrapping around the base to create a dynamic and dramatic scene.

The model is optimized for clean printing while preserving sharp details, making it ideal both for painting and display. Even unpainted, it keeps a strong visual impact thanks to its layered design and depth.

Painted example disclaimer
The main image shows a version that has been hand-painted using an airbrush after printing.
Your print will arrive as a raw single-color FDM print, ready to be painted if you wish.

collectible 3d figure

display

Comment & Rating (9)

@user_1022340682

A very difficult one to color 😅

Show original

@Snorimas

Print Profile

0.2mm layer, 2 walls, 10% infill

super cool model but the supports are a nightmare to get off. had to reprint it with support interface and it was still almost impossible to get them off

@user_3332713463

teeth and tail lik hard still bit made it wrk ill add full paint when finished

@user_3332713463

did not leave me with cleaned finish jaw tail came off with supports id say more resin print

@user_3332713463

upscale it a bit and was printable so ty

@Snorimas

super cool model but the supports were a nightmare to get off, had to reprint since a few things broke off while trying to get the supports off

@Betagui

is it possible to separate the pokemon from the base to print separately

Show original

@user_2088242943

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

tail EXTREMELY DELICATE please use caution on removing supports on tail!

@Magaliprigent

Print Profile

0.2mm layer, 2 walls, 10% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.