[KR] Heredity: The Book of Swan + Expansion insert

This is an organizer made to fit the package case of Heredity: The Book of Swan, released in Korea

It is also designed to accommodate the Heredity: Memories expansion

[Key Features]

• Can store the additional Heredity: Memories expansion
• Can store cards including sleeves (based on 0.07mm)
• Sufficient internal height (approx 1-2mm) for rulebook storage
• Designed with a hinged cover for the token box, allowing the game box to be stored upright (requires 3x2mm magnets)

(Note: The hinge part of the case is thin, so applying too much force can easily damage the lid's hinge)

[Additional Information]

1. For the token box and similar items, use adhesive to insert 3x2mm magnets into the hinge cover's fastening parts (allows for secure storage)
2. For standee storage, please arrange chapter standees (configured as 1, 2, 3, 4, 5, 6+7) into 6 slots / 1 slot for items / 1 slot for damage tokens

3. For card storage, please refer to the image below and store only chapters with a relatively small number of cards

   (Other chapters can be placed freely)

    

※ If the bottom part appears stuck together when printing the case, carefully fold it using the hinge, and the stuck part will be thin and relatively easy to separate

(For smooth operation when printing the hinge part, 0.12mm layer height is recommended)

※ Please note that this method uses Bambu Studio's 0 top/bottom layers and infill print settings

(If printing with other slicers, please configure infill settings separately)

( + If you are concerned about the durability of the mesh part, you can reset the print settings for that specific object to print it in a filled form)