Spiral Wind Spinner Garden Stake

Spiral Wind Spinner Garden Stake

This is a functional and decorative 3D printed wind spinner designed for smooth, low-friction rotation in outdoor conditions. The model uses ball bearings in both the rotor and the swivel body, allowing it to spin easily even in light wind.

In addition to its decorative purpose, the spinner also acts as a simple wind direction indicator.

The design consists of a rotating rotor (blades) and a swivel base, both supported by standard 608ZZ ball bearings, ensuring durability and consistent performance.

Key features:

• spins smoothly even in light wind
• integrated wind direction functionality
• dual-bearing construction for minimal friction
• designed for standard M8 hardware
• suitable for garden, yard, patio, or outdoor installations

Hardware required:

• 2× 608ZZ ball bearings
  (8 mm inner diameter × 22 mm outer diameter × 7 mm width)
• 1× M8x30 bolt
• 1× M8 threaded rod (stud), length as required (e.g. ~1 meter)
• optional: M8 nuts and washers for additional stability

Assembly notes:

• The rotor (spinner blades) is mounted on a 608ZZ bearing using an M8x30 bolt
• The swivel body also uses a 608ZZ bearing, allowing the entire spinner to align with wind direction
• The base is mounted on a vertically installed M8 threaded rod (stud)
• The rod must be positioned vertically to ensure proper operation and smooth rotation

Printing recommendations:

• For outdoor use, PETG, ASA, or ABS is recommended
• PLA can be used but may degrade over time under UV exposure
• Print with good layer adhesion for strength and durability
• Smooth surfaces improve rotation performance
• Optional light sanding or lubrication can further reduce friction

Thanks for checking out this model.
Follow my profile to stay updated with the latest projects, upgrades, and new designs.