Warmian Chainsaw Massacre

This figure is designed with a strong focus on preserving fine details, which is why it is intended to be printed using a 0.2 mm nozzle and carefully tuned settings.

The STL file includes optimized print settings – this model is not meant for fast printing. Lower speeds help achieve a much higher surface quality and capture small details more accurately.

Settings & Recommendations:

• Material: PLA
• Nozzle: 0.2 mm
• Print at high quality (low speed recommended)
• Supports are required
• Very wide brim included for better bed adhesion

With these settings, the figure will come out highly detailed, but print time will be longer – patience is key 😉

Notes:
If you care about quality, do not increase the print speed. This model was prepared to look as good as possible, not to print as fast as possible.