IWB Sig P365 XMacro Holster with Olight PLX Light
Print Profile(1)
Description
This is an IWB holster for the Sig Sauer P365 XMacro or Sig Sauer P365 Fuse paired with the Olight PLX. Great retention with the 5.5mm spacers. Use 5mm for even stronger retention.
PLA+ is the minimum. I would print with PETG. I print with tree supports.
Desired Hardware
https://www.amazon.com/dp/B09QXXKWSQ/
You'll still need:
(1) M4 5/8" Machine Screws (link below comes with 4)
(2) M4 ¾" Machine Screws (link below comes with 4)
(3) M4 Nuts (link below comes with 4)
https://www.homedepot.com/p/Everbilt-M4-0-7-Stainless-Steel-Lock-Nut-4-Pieces-837171/321071795
-
Printed Clips
The metal clips are better, but You can print the PLA wing and clip if you don't want to pay for the metal clips.
(1) M4 5/8" Machine Screws/Nut (link below comes with 4)
(2) M4 ¾" Machine Screws/Nuts (link below comes with 4)
(2) M4 ¼" Machine Screws/Nuts (link below comes with 4)
(5) M4 Nuts (link below comes with 4)
https://www.homedepot.com/p/Everbilt-M4-0-7-Stainless-Steel-Lock-Nut-4-Pieces-837171/321071795
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)