Timemore Sculptor 078/s Hopper

A coffee bean hopper for the Timemore Sculptor 078 and 078s coffee bean grinder that has a steeper internal angle for the coffee beans which this prevents any of them from sticking to the hopper walls (as they tend to do with the OEM hopper). The hopper can technically just rest on top of the grinder after the OEM hopper has been fully removed but it is preferable to use the method of magnetic coupling intended for this 3d model. The system of magnetic coupling allows the hopper to be quickly removed for cleaning and inspection of both the hopper and the grinder chute itself. 

Full assembly with magnets requires:

• 8 neodymium magnets with a diameter of 8mm and a height of 2mm. 
• Super glue for gluing the magnets into the prints, preferably a superglue gel (it makes it easier to get good adhesion imo). I use Loctite 454 gel.
• 1.5 mm hex screwdriver (or equivalent phillips small size screwdriver if you have phillips screws on your grinder) to reuse the OEM screws (alternatively you can use a M2.5 threaded screw of your own choice, but if you do please ensure it fits fully flush into the mount parts.)