51mm Cover Cap / Plug
Print Profile(1)
Bill of Materials
Description
I designed this cap because the flip-down handle on my crawl space hatch left an ugly open hole in the laminate when folded down. It bugged me, so I made this.
The cap has a 60mm lip that sits 2mm above the surface, with a 50.5mm plug that drops 9mm into the 51mm hole for a nice easy fit. The inside is hollowed out to 40mm to save filament and the edges are chamfered so it slides in smoothly.
Pop it in to hide the hole, pop it out when you need to access your crawl space. Done.
I printed mine in ASA since the crawl space hatch is right by the front door. This way it handles UV, moisture, wet shoes, mud, and general wear much better than PLA would in that spot.
Dimensions:
- Lip: 60mm diameter, 2mm thick
- Plug: 50.5mm diameter, 9mm deep
- Hollow inside: 40mm
- Chamfered edges
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)