1/12 Scale Female Robot Doll Universal High-Heeled Shoe Blanks

1/12 Scale Universal High Heel Shoe Blanks The dimensions have been carefully adjusted to better fit the foot shapes of mainstream figures. Visual effects have been validated through experiments with Kotobukiya Megami Device and Nuclear Matrix figures 1. Styles: Available in three styles: square-toe, round-toe, and pointed-toe. The left and right feet for each style can be printed separately 2. Visuals: The heel height is approximately 8mm, visually equivalent to about 10cm high heels in real life 3. The pointed-toe style is slightly longer to ensure sufficient forefoot space 4. Ironing: Considering that the shoe blanks will eventually be painted or covered with fabric, ironing was not enabled. You can enable it yourself if needed 5. Filament Compatibility: The printing material used for testing was Bambu Lab official PLA Basic. We cannot guarantee that other types of filament will print correctly 6. Supports: After testing both normal and tree supports, tree supports were found to be more convenient. Theoretically, it should be printable even without supports (as the volume is very small), but supports were added as a precaution. Tests showed that removing supports is not difficult, but removing the brim from the bottom of the heel can be challenging and might tear off the heel, so please be careful 7. The shoe blanks are very thin, and the heels are very slender. The overall model is quite fragile, especially the heels. It is recommended to have super glue ready for additional reinforcement beforehand 8. Layer Height: Use 0.12mm layer height + 4 walls + 15% infill. 0.08mm layer height showed no visual improvement compared to 0.12mm in experiments. Models printed with layer heights above 0.2mm become more fragile and prone to breaking due to decreased overhang performance 9. Fixed some detailed errors in the original model, such as the heel and sole not fitting perfectly