WW2 US Sherman Anti-Tank Round | 75mm APCBC

Summary

Want a life-size replica of the anti-tank rounds Allied Sherman tanks fired at German Panzers in WW2?  This model requires no AMS, even the text on the round can be printed without any AMS.  The round screws together in seconds, no glue is required.

Filaments used

• Round/Shell
  • Bambu Matte Yellow
  • Polymaker Army Green (Amazon link)
  • Sunlu Silk Red Copper (Amazon link)
• Casing
  • Overture Silk Gold (Amazon link)

Assembly takes seconds

Shell/Round

1. Screw together the 4 body segments.

1. Insert the yellow letters into the corresponding holes in the round.
   1. Make sure you look inside the holes and be sure that there's no support material left.
   2. When you remove the letters from the build plate, keep them in the same order so you don't wonder what order they are supposed to go in when inserting them.  Best strategy is just to remove letters one by one from the build plate and immediately insert them.

Casing

1. Simple screw together the top and bottom, then insert the round into the top.

( ! ) Do not sell my prints — I have not authorized selling prints.  If you sell my prints on Etsy, Amazon, eBay, etc, I will find out.

This 3D print is intended for decorative purposes only and is not suitable for children. Small parts may present a choking hazard and edges may be sharp. By printing this 3D print, you assume all liability for any harm to yourself or others resulting from its use.