Search models, users, collections, and posts
Italian Flag Hand Hype chain
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
2
2
0
0
2
2
Released
Description
HYPE CHAIN – PLA PRINT PROFILE (Bambu Lab)
Material: PLA (Silk recommended for shine)
Layer Height: 0.16mm
Initial Layer: 0.2mm
Walls: 4
Top/Bottom Layers: 4
Infill: 10–12% (Gyroid)
Nozzle Temp: 210°C
Bed Temp: 60°C
Cooling Fan: 100% (after first 2 layers)
Speed:
Outer Wall: 60 mm/s
Inner Wall: 120 mm/s
Infill: 180 mm/s
First Layer: 20 mm/s
Retraction: 1.0 mm
Z-Hop: 0.2 mm
Wipe: ON
Seam Position: Random
Ironing: ON (top surfaces only)
Build Plate: Textured PEI
Brim: OFF
Fine Tune (Important for chains)
Horizontal Expansion: -0.05 mm
Elephant Foot Compensation: 0.15 mm
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (0)