Roman Reigns Tribal Chief WWE Hueforge
Print Profile(3)
Description
Roman Reigns Tribal Chief WWE Hueforge
I hope you like it! Subscribe to me so you don't miss any new uploads!
Select the desired size in the print profile I have created profiles for 200x200, 150x150 and 100x100 mm
You can also scale the model along the X and Y axes as desired The Z-axis must NOT be changed!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Ash Gray
At layer #21 (1.76mm) swap to Jade White for the rest.
Boost Me (for free)
If you like my creation, please support me with a small boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)