A1 AMS Hub delete with working filament sensor

AMS hub delete for A1/A1mini printer series. This design allows to maintain the filament detection functionality by keeping the original magnet position with the cleanliness and ease of use of standard PC4-M6 push connector. The bottom is also tapered to ensure proper alignment of the filament.

After taking out the original AMS hub, push out its magnet from one side and make sure to mark its original orientation (e.g. small dot at the bottom of the magnet on the side of the filament. In the next step push it into the pocket in the same orientation and keeping the original spring from beneath the hub inside insert into the machine. The connector should easily screw in afterwards.

If You need .step files or any changes, don't hesitate to reach me:)