ipuro Room Fragrance Dispenser Design Casing Cover

This model is designed to beautify the ipuro room fragrance dispenser. It is offered in many drugstores, smells good, but does not look very nice or decorative. That's why I designed a box and a cover. The fragrance dispenser can be inserted quickly and easily there.

The complete model consists of three parts that can be assembled without tools or glue:

• The bottom part, where the dispenser is inserted from above
• The lid, which is placed between the glass and the original screw cap
• The cap, to cover the black screw cap and enhance it with a different color

Assembly:

The screw cap is unscrewed from the ipuro fragrance dispenser, and the fragrance dispenser is pushed through the hole of the lid. Then the screw cap can be screwed back on. The lid is thus fixed to the fragrance dispenser. After that, the product can be inserted into the design box. Gluing is not recommended, as you will want to change the fragrance dispenser when it is used up. Attention: the fragrance dispenser does not sit firmly in the box and can fall out if you turn the box upside down. But you don't do that with the original dispenser either, as it would otherwise leak :-)

Optional:

If you don't like the black color of the ipuro fragrance dispenser, you can optionally print the cover cap in a nice, matching color.

I have already printed this model with the following Bambulab filaments: PLA apple green (11502), ivory white (11100), desert brown (11401) and PETG white (33100). All results look very nice and fit into modern bathrooms.