Tesla Model 3 Reversing Camera Washer
Print Profile(1)
Description
This one took me a while. I was so annoyed my wifes Tesla 3 camera didnt have a washer on it, i designed this part to be a direct replacement.
You will need a few other (really cheap) bits to make it work - a washer bottle (ebay, about £9) and a button to make it work ( small non-return valve is also good - about 50p)
Google how to remove the original handle for the boot. Take it out, replace with this and plumb in the washer bottle. I ran the pipe through the right rubber hose on the boot, had the bottle attached to the recessed part of the boot floor and ran a wire from the battery to it via a small momentary switch i attached to the lower dash.
Added some fairly rubbish instructions to get you going - good luck
I never really had success in printing it each time- would seem to work beautifully one day, then not the next. Good luck
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)