One Hand Snus Case | Hidden Magnets

One Hand Snus Case | Hidden Magnets

Upgrade your everyday carry with a snus case designed for both aesthetics and ultimate functionality. Featuring a striking visual indicators, this case doesn't just look great—it feels incredibly satisfying to use.

Whether you are carrying snus, nicotine pouches, or mints, this model was engineered from the ground up for smooth operation and a premium feel.

Key Features:

• Dual-Sided Access: Thoughtfully designed to be opened from either side, giving you quick and easy access to your pouches no matter how you pull it out of your pocket.
• One-Handed Operation: The sliding mechanism is perfectly tuned so you can effortlessly open, dispense, and close the case using just one hand.
• The Perfect "Snap": Built to accommodate 6x3mm magnets, the closure provides a highly satisfying, tactile snap every time it locks into place. It doubles as a great fidget toy!
• Secure & Sealed: With magnets positioned on both ends, the case stays firmly shut in your pocket or bag, maintaining a tight seal to keep your pouches fresh and secure.
• Sleek Visual Design: Features structured slots (print the inserts in a vibrant red or your favorite accent color) to show the strength. You might have to change the color in the slicer.

Hardware Required: Round Neodymium Magnets (6mm diameter x 3mm thickness). A drop of superglue is recommended (Works without glue too if you have a brass nozzle) to keep them firmly in place.

⚠️ Important Printing Notes: Pauses & Magnets

To give this case a premium, seamless finish, the design uses "captive magnets"—meaning the magnets are completely embedded inside the plastic!

Why are there 2 pauses in the Print Profile? The provided print profile is pre-programmed with two strategic pauses.

1. When the printer pauses, it will move the toolhead out of the way.
2. This is your cue to carefully drop the 6x3mm magnets into their designated slots.
3. Once inserted, simply resume the print. The printer will bridge over the magnets, sealing them perfectly inside the case so they will never fall out or need superglue.

Pay Attention to Magnet Orientation! (Crucial) Because this case opens on both sides and relies on magnetic attraction for that satisfying "snap" closure, polarity is everything. If you drop a magnet in upside down and the printer seals it, your case will repel itself instead of closing!

💡 Pro-Tip for Assembly: Take your stack of 6x3mm magnets and use a sharpie to put a dot on the top of the stack. As you drop them into the base and the sliding lids during the print pauses, use those dots to ensure your North/South poles are facing the correct direction to attract, not repel. Double-check your polarity before hitting "resume"!

Happy Printing!

Here are links to some of my other models.