Honda Forza Phone Holder Quad Lock System
Print Profile(1)
Bill of Materials
Description
Quad Lock phone or navigation mount system.
Can be used on 125/350 models - year 2019-2026
Recommended material: ASA or PETG. Do not use PLA under any circumstances.
The .3mf file is designed exclusively for BambuLab printers.
Print parameters:
- Perimeters: 4-6
- Infill: 20-25%.
Required assembly parts:
- 8x M4 countersunk nuts
- 1x M5 countersunk nut
- 6x M4x16 Allen screws
- 2x M4x12 Allen screws
- 2x soft foam or rubber
- 1x Soft double-sided tape recommended ← Click here
For the center model and the model with gears, embed the nuts from the back side. This prevents the nut from being pulled out under higher tensile loads. When the nut is placed from the back, the material physically stops it from falling out. To make embedding from the back easier, it is recommended to use a screw: pass the screw through the hole, thread the nut onto it, and then pull on the screw to safely and securely seat the nut.
When printing from ASA material, it is important to use a tower for longer layer times in order to cool the layer - > otherwise there is a risk of inconsistent cylinder diameter!!!! See the image below. This may not apply to PETG material.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)