Belbullab-22 Starfighter (X-Wing 2.5 TMG)

A scale model of the Belbullab-22 Starfighter, prepared for Confederacy of Independent Systems (CIS) in X-Wing 2.0 / 2.5 miniatures game.

There are 2 print profiles:

1. “Tough supports” - The supports are quite stiff, but once you get them moving should come off pretty smooth. That being said - while removing the supports, you need to take care to not break the rear “fin” (under cockpit), as well as the bottom of the side wing features. Plus, it does take quite a bit of force and prying to remove them.
2. "Small supports" - with tree slim supports. I had to use glue on the printbed to make sure the model printed fine, but it's much easier to remove the supports.

Additionally, with my filament and settings, I had to clean up the peg receptacle a bit, otherwise the peg wouldn't fit (but a bit of deburring and cleaning up the edges was enough).

Follow my Shipyard collection to stay in touch with new X-Wing TMG models I upload!