puresa

cover

微信图片_20260410091626_1795_10.jpg

微信图片_20260410091628_1797_10.jpg

微信图片_20260410091630_1799_10.jpg

微信图片_20260410091631_1800_10.jpg

微信图片_20260410091632_1801_10.jpg

微信图片_20260410091633_1802_10.jpg

plate_1.png

2fcd14b65d2b4ec4.jpg

0.2mm layer, 2 walls, 15% infill

3D Manufaktur Fürth

Katze Handyhalter.png

Optimierte Parameter:<ul><li>1 0.55mm äußere Wand</li><li>Arachne</li><li>0.16mm Schicht</li><li>0.18mm erste Schicht</li><li>6% Wabenfüllung</li><li>weniger Hüllschichten</li><li>lower speeds</li><li>organic tree manual supports</li><li>painted brims</li><li>brim gap: 0,18mm</li></ul>

Optimized parameters:<ul><li>1 0.55mm outer wall</li><li>Arachne</li><li>0.16mm layer</li><li>0.18mm first layer</li><li>6% honeycomb infill</li><li>fewer perimeter layers</li><li>lower speeds</li><li>organic tree manual supports</li><li>painted brims</li><li>brim gap: 0.18mm</li></ul>

Optimized parameters - 0.16mm layer, 1 walls, 6% infill

ChatGPT Image May 4, 2026 at 02_24_29 PM.png

print with pink, orange, and white.

Big crab

wechat_2026-04-15_110941_239.png

Model optimization to improve printing efficiency

3D Prince

ku20260429_130835.png

frt0260429_114727_(1).png

frt0260429_114727.png

680742404_1350902290472562_4017102984493825713_n.jpg

678406849_1387688986450615_2776056551009795711_n.jpg

677155443_979453427781051_4874858103980612101_n.jpg

many many substantial value adding adjustments also that result in low filament material waist and quick print time with reasonably good strength…&nbsp;see the specifics below… Adaptive layering for fine detail in the face of the cat,  Height range modifiers for assisting support removal and adding strength by changing wall thickness to .6mm two loops, and turning on the over hang detection as well as adding some infil back in. Volume modifiers to give internal support with concentric infill 15% and overhang detection.  0.28mm layer, 1 walls, 1mm wall width, 0% infill, wall generator classic, detect over hang walls off, detect narrow internal solid infill off, ensure vertical shell thickness disabled, acceleration speed [ short travel , initial layer travel, initial layer, outer wall, top surface ] all turned up to 10000mms. max volumetric speed for PLA, and PETG both set to 30mm3/s, cooling for over hangs set to 100%, minimum fan for layers less than 4 seconds 100% and for the other layer times 100% and auxiliary part cooling fan 80%.  note that filament flow, and cooling settings will likely revert to default and acceleration speed will also likely revert to default if you use a different Bambu printer.

Adaptive Layers Carefully Tuned for Detail & Min Waist -100%

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Cat Phone Stand

ASIA

Print Profile(5)

Description

Comment & Rating (395)

License

Related Models