Project Hail Mary Articulated Rocky Figure - Free 3D Print Model

Search models, users, collections, and posts

sliceNdice

Miniatures>Creatures

IP Report

GIF

Print Profile(1)

All

X1 Carbon

H2D

P1S

H2D Pro

X2D

H2S

X1E

P2S

H2C

P1P

A1 mini

A2L

0.16mm layer, 2 walls, 15% infill

Designer

3.4 h

1 plate

4.6(33)

Open in Bambu Studio

Boost

453

1295

1.2 k

990

Released

Bill of Materials

Bambu Filaments

Select all

PLA Matte

Description

This is the official articulated model of Rocky from the film Project Hail Mary (available here). I've arranged the parts and added supports to ensure it prints properly.

Boost Me (for free)

Thank you for your support!

After testing orientation of parts and adding correct supports, I found what I feel is a good balance, please enjoy! If you prefer, you can try rotating the parts individually prior to slicing. The print in the photo is printed at 100% although you can scale it up if you like.

Be sure to view the PDF instructions as this model requires some assembly (snap together, no glue required).

The supports are removed most effectively with pliers or the flush cutters that came with your printer. I only used pliers but if you want easier support removal you can try soaking the model in warm water to help soften the supports.

CHANGE LOG:

April 15 - I modified the orientation of the torso so that it's vertical, which helps reduce support artifacts that were showing up on the side.

More Project Hail Mary projects are available:

Check out the Hail Mary blueprint style bookmark here!
Check out the HueForge bookmark available here!
Rocky's model of Ryland Grace keychain with optimized supports here.

Documentation (1)

Assembly Guide (1)

Rocky Articulated Build Instruction.pdf

Comment & Rating (79)

@Printer_dude.

Ts straight up 👎

The designer has replied

@sliceNdice

nice colour choice!

@3dprinterfan

thumbs up baby 👎🏻

@Montalvo512

great print :D amaze amaze amaze

The designer has replied

@sliceNdice

wow looks good, did you paint it?

@Montalvo512

Replying to @sliceNdice :

yes

@3dprinterfan

thumbs up baby 👎🏻

@jochip

Amaze amaze amaze!!

The designer has replied

@sliceNdice

wow amaze job on this detail the colours are so great!!

@user_2527234706

what paint did you use for this model

@3dprinterfan

thumbs up baby 👎🏻

@jj_dude

Print Profile

0.16mm layer, 2 walls, 15% infill

printed very nicely, no errors whatsoever ❤️

The profile uploader has replied

@sliceNdice

thank you! nice print thanks for sharing the build plate pic 😄

@MobyDork

Great model. I ended up making a small army after my daughter asked for one. The big one is scaled up about 150% and I cut the pieces to make it easier/cleaner to print. Filament is AMOLEN PLA Fossil Gradient Stone

(Edited)

The designer has replied

@sliceNdice

hah great idea, looks amaze! thanks for sharing the pic

@3dprinterfan

ITS THE ROCKY ARMY!

@jdh96romeo

Print Profile

0.16mm layer, 2 walls, 15% infill

My son loves it! 👎 👎

The profile uploader has replied

@sliceNdice

thanks for the print pic, it looks great!

(Edited)

@user_1216484682

Print Profile

0.16mm layer, 2 walls, 15% infill

I couldn’t get 4B in for A to snap together, but other than that such a great model

@xGalaxies

yeah these pieces were super tight. I think if it kept the same ball joint style as the rest of the limbs this would’ve been a easy 5 star. the texture and attention to detail on part orientation sets this profile apart from the others.

(Edited)

@GSETHT

same. it’s very frustrating

@tung

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed just great. Identifying the parts afterwards is challenging because the letters on the legs are too small to print well. However, it’s not that hard.

The profile uploader has replied

@sliceNdice

would it help if they were labeled on the plate? and your painting looks great by the way!

@TigressAndFox

Print Profile

0.16mm layer, 2 walls, 15% infill

Amaze amaze!

The profile uploader has replied

@sliceNdice

looking good! thanks for the pic

@user_3224116056

Excellent print first try. Supports can be challenging. Thanks for the great model.

The designer has replied

@sliceNdice

nice job! yea it can be tricky glad you were able to put it together!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.