Angles90 A90 Grips Rotating Cable Attachment
Print Profile(2)


Description
This is a handle similar to the 90-degree handle, but instead of using the flat strap, I use a 550 Paracord loop. Make sure you burn the ends with a lighter so they don't fray, then loop it through the handle and tie a tight knot to secure the loop to the handle. I created 2 versions: one is a thicker (34mm thick) more stout grip for larger hands and a thinner version (27mm thick) for standard size hands, the same size as the A90 handles knockoff shown in the picture.
In each 0.4mm and 0.6mm print profile, there is also a PETG and PLA version, whichever you prefer. I also created a retainer pin for the loop so it doesn't fall out of the sides of the handles. I optimized the print profile to have at least 4 walls and 20% gyroid infill on the 0.6mm nozzle profile. For the 0.4mm nozzle profile, I increased the wall count to 6 walls and 25% gyroid infill. While I think this should be enough, you can increase it to your desired strength. I have tested these handles with over 150 lbs of pulling load, and they are holding up awesome ;)
MINIMIZE JOINT STRESS – MAXIMIZE NEW STIMULI AND GRIP POWER
Meet the A90 Grips – the world’s first dynamic training handles that redefine pulling exercises. Engineered in Italy with a patented ergonomic design, these grips allow your hands and wrists to move freely and naturally, minimizing joint strain while maximizing muscle activation. Whether you're performing pull-ups, deadlifts, chest pulls, or rows, the grips support a full range of motion: neutral, supinated, or pronated and even let you rotate your grip mid-rep. This promotes healthier joints and greater training variety.
Key Benefits:
- Sold as a pair for symmetrical workouts
- Dynamic, joint-friendly movement for pull-focused exercises
- Compact, portable, and travel-ready
- Integrates seamlessly with all Angles90 equipment
From serious lifters to rehab-conscious athletes, A90 Grips empower you to train how your body was built to move—with less strain, more control, and better results.
Boost Me (for free)
If you enjoy my work, feel free to boost, like, or comment. Thank you for your support!
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.













Comment & Rating (0)