BTS Lightbox Collection – Clean & Bright Edition

⭐ Designed by InnoCraft 3D
If you enjoy this model, please consider Boosting – it helps me create more designs!

🔍 Explore more models here:
 https://makerworld.com/en/@Andreiinnocraft
 

Round LED lightboxes designed for a clean, uniform glow and sharp multi-color details.
Optimized for multi-color printing and a premium final look.

I really put effort into making these as clean as possible — mine turned out great, hope yours will too! 🙏

⚠️ IMPORTANT – PRINT QUALITY (READ BEFORE PRINTING):

• Clean build plate is mandatory
  Any grease or fingerprints will reduce adhesion and create visible defects.
• Clean nozzle before print
  Residue = stringing, especially during color changes.
• Watch first 1–2 layers closely
  If you see lines, blobs or imperfections → STOP and restart.
  These WILL be visible when the light is ON.
• Dry filament is critical
  Moist filament causes stringing and poor surface quality.
  → Dry your filament before printing.
• Multi-color tip
  Adjust purge/flushing settings if needed to reduce stringing during swaps.

💡 LED & HARDWARE USED:

• LED strip (USB powered):
  https://share.temu.com/M8GsRHP1jvB
• USB power connector:
  https://share.temu.com/qzVlY2OmqfB

This setup provides a clean and even light inside the lightbox.

💜 Thank you for supporting independent creators!