Fuzzy Liquid Pattern Planter + Plate - 3 Sizes!

This is the second planter design I've made, which continues on the fluid-like organic shape line with fuzzy texture. I really enjoy the way the light reflects off the pot when sitting on a shelf and sometimes shaded by other plants. 

The cachepot sit's perfectly within the plate, and has drainage holes. There's also a bigger hole in the center, which I like to use to poke my finger in and push the plant pot outwards, when I want to remove the plant from the decorative planter. 

This prints without supports in all sizes.

There are 3 profiles for the 3 sizes:
- 9cm (95mm internal diameter) → About 123.51g / 7h 32m
- 10cm (107mm internal diameter) → About 164.65g / 9h 47m
- 12.7cm (130mm internal diameter) → About 254.39g / 15h 18m

If you need any particular size, I'd be happy to resize this for you! Just let me know the internal diameter and height needed <3 

Since all of my plants are indoors, I've only ever printed this out of Matte PLA. I assume this could work as well in PETG for outdoors planting but I've not yet tried this and dialed in the profiles.  The included PLA profiles should result in minimal defects/stringing, and whatever imperfections do happen can be quickly wiped with a cloth or your hands, leaving you with a nice finish. 

If you're printing with the A1 mini, please move “SOLID-2” (the tray) to another print plate so it fits. 

“SOLID-1” is the physical body of the cachepot, and all the rest are the patterned surfaces around it, always move them together!

Hope you enjoy!