Anonymebanane

cover

WhatsApp Image 2026-04-09 at 20.31.59 (1).jpeg

WhatsApp Image 2026-04-09 at 20.31.59.jpeg

WhatsApp Image 2026-04-09 at 20.32.00.jpeg

plate_1.png

6d3efab4530641c8.jpeg

Printer &amp; Slicer:<ul><li>Printer: Bambu Lab P2S</li><li>Slicer: Bambu Studio v2.05.00.66</li><li>Nozzle Diameter: 0.4mm</li><li>Extruder Type: Direct Drive</li><li>Print Profile Base: &#34;0.20mm Standard @BBL P2S&#34;</li></ul>Material:<ul><li>Filament Type: TPU (black)</li><li>Nozzle Temperature: 240°C</li><li>Nozzle Temperature Initial Layer: 240°C</li><li>Max Volumetric Speed: 3.2 mm³/s</li></ul>Bed:<ul><li>Bed Type: Textured PEI Plate</li><li>Bed Temperature: 35°C</li><li>Bed Temperature Initial Layer: 35°C</li></ul>Layer Settings:<ul><li>Layer Height: 0.16mm</li><li>Initial Layer Height: 0.2mm</li><li>Elephant Foot Compensation: 0.15mm</li></ul>Walls:<ul><li>Wall Loops: 3</li><li>Outer Wall Line Width: 0.42mm</li><li>Inner Wall Line Width: 0.45mm</li></ul>Top &amp; Bottom:<ul><li>Top Shell Layers: 6</li><li>Bottom Shell Layers: 4</li><li>Top Surface Line Width: 0.42mm</li></ul>Infill:<ul><li>Sparse Infill Density: 25%</li><li>Infill Pattern: Gyroid</li><li>Sparse Infill Line Width: 0.45mm</li><li>Skin Infill Density: 25%</li><li>Skeleton Infill Density: 25%</li></ul>Speeds:<ul><li>Outer Wall: 50 mm/s</li><li>Inner Wall: 80 mm/s</li><li>Sparse Infill: 100 mm/s</li><li>Internal Solid Infill: 100 mm/s</li><li>Top Surface: 50 mm/s</li><li>Gap Infill: 60 mm/s</li><li>Bridge: 30 mm/s</li><li>Initial Layer: 30 mm/s</li><li>Travel: 600 mm/s</li><li>Support: 40 mm/s</li><li>Support Interface: 40 mm/s</li><li>Prime Tower Max: 60 mm/s</li></ul>Retraction:<ul><li>Filament Retraction Length: 0.5mm</li><li>Filament Retraction Speed: 20 mm/s</li><li>Retraction Length (machine): 0.8mm</li><li>Deretraction Speed: 30 mm/s</li></ul>Cooling:<ul><li>Fan Min Speed: 100%</li><li>Fan Max Speed: 100%</li><li>Close Fan First X Layers: 1</li><li>Fan Cooling Layer Time: 100s</li></ul>Support &amp; Adhesion:<ul><li>Support: disabled</li><li>Brim Type: auto</li><li>Brim Width: 5mm</li><li>Brim Object Gap: 0.1mm</li></ul>Other:<ul><li>Line Width (general): 0.42mm</li><li>Initial Layer Line Width: 0.5mm</li><li>Arc Fitting: enabled</li><li>Detect Overhang Wall: enabled</li><li>Ensure Vertical Shell Thickness: enabled</li><li>Detect Narrow Internal Solid Infill: enabled</li></ul>Estimated Print:<ul><li>Weight: 4.64g</li><li>Filament Used: 1.55m</li><li>Estimated Time: ~44 minutes</li></ul>

0.16mm layer, 3 walls, 25% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

Beschreibung:Replacement adapter to connect the FlexTail Zero pump to Therm-a-Rest sleeping pads with the WingLock valve system (e.g. NeoAir XTherm NXT, XLite NXT, etc.).I lost the original adapter that came with my FlexTail Zero and couldn&#39;t find a replacement to buy separately, so I designed this one from scratch. Printed in TPU for a snug, airtight seal on both the pump nozzle and the WingLock valve.Please Use the recommended Settings and TPU for a working adapter.&nbsp;&nbsp;

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Flextrail Zero Pump Thermarest Adapter Winglock

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models