Pokemon Tin Insert (Octogon shape)

I have several of these tins laying around and decided to take a stab at creating a unique way of storing and transporting decks. My design needed to be able to hold damage counters (the larger or smaller sized dice), a 6 sided dice for rolling heads or tails, condition markers, and one 40 to 60 card deck that is in or out of sleeves or in a standard sized deck box. Please let me know what you think! I may try other adaptations down the road and I may also design inserts for some of the other tins that can be found out in the wild.

This insert is a tight fit but it does work. I have tryed it on some of the Sun and Moon era tins and the newer Mega Evo. Charizard tins. Just have some patience and a nice solid surface to push against. A little bit of dry lube or very light coating or a wet lube can sometimes help, just make sure to clean up any mess before putting your precious cards in.

If using the STL file, I would recommend the following settings as they worked well for me but feel free to experiment:

Layer height: 0.2 mm

Wall Generator: Arachne

Wall Loops: 2 or 3

Top Shells: 6

Sparse infill: 10%

Infill Pattern: Gyroid/cross zag (or personal preference)

This model should fit on the A1 Mini but I do not own a mini.