Ferrari F2002 1:10 model canopy

Ferrari F2002 1:10 model canopy

I needed a display cover for my 1:10 scale Ferrari F2002 RC car model.

This is a project still in progress, but it currently allows you to print a perfectly functional and adaptable 3-piece cover that is perfectly 1:10 scale. I will add more print profiles as soon as they are ready.

Currently, some manual work is needed to use it as a cover for an actual model. Otherwise, you can always print it and use it as a display piece (if you ask me, I can add the wheels in a separate file for Bambu Studio).

To use it as a cover for a radio-controlled model, you need to cut the bottom part with a sharp cutter and trim it.

The print is configured for a resistant thickness but hollow inside, so by removing the base, the model remains completely empty. At this point, all that remains is to join the three printed pieces, and you're done.

I have attached images of how to cut out the bottom part when printing the front tip: Remove the bulk with a pair of scissors and refine with a sharp cutter.

Regarding coloring, I recommend simply coloring the entire model red using red filament and printing decals like the ones I added to the model in the figure (they can be found online and are simply sponsor logos).