BetaFPV M75 and similar 1S-2S small FPV propeller puller
Print Profile(2)
Description
Patek M75 and similar 1S-2S small FPV propeller puller, prevents motor damage when removing propellers
Suggestions
1. The pushing pin should be made of a sturdy metal material, with a diameter of about 1.2-1.4mm (1.3mm recommended), such as a watchband link pin
2. For the pulling cord, a retractable badge reel cord of about 1mm or a fishing Dyneema line can be used, but softer cords might make it difficult to put the propeller on
3. The length of the pulling cord and the pushing pin need to be matched (the pinhole has a reserved depth of 10mm), leaving enough space to pull the propeller off
4. The push rod cap can be secured with two M2×8 or M2×6mm self-tapping screws, or it can be directly secured with super glue
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)