Xiaomi Mi Dispenser Soap Dispenser Plug Adapter - Free 3D Print Model

Search models, users, collections, and posts

@modelandfun

Household>Other House Models

IP Report

Print Profile(1)

All

A1 mini

X1E

P2S

H2D Pro

P1P

H2D

X1 Carbon

P1S

H2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

47 min

2 plates

5.0(5)

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

Xiaomi automatic foam soap dispenser ATTENTION before you print there are two variants see print plate

Video Guide:

https://youtube.com/shorts/53wiTLRirzc?is=InatVMhHDXGOSxRm

https://vm.tiktok.com/ZGdHPhwcq/

I developed a new adapter for the bottle that makes refilling the soap quick and easy

The design consists of two parts: a suction adapter for the hose and a cap adapter for the bottle

The suction adapter is used in the soap dispenser and replaces the original cap with a 3D-printed adapter

Please note that there are two versions: One for soap dispensers with 4xAA batteries and another for rechargeable battery-powered models

The bottle cap remains the same for both variants, while the suction adapter has been adapted to the respective version so that it can be securely attached to the soap dispenser

So many attempts were necessary for everything to fit perfectly

dispenser accessories

Comment & Rating (23)

@yoshi74

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice ! perfect replacement. Original cap made me crasy !

The profile uploader has replied

@neustroew

Thank you for your feedback, Please check out this bracket. This was also created with an development effort of 6 hours. https://makerworld.com/models/2641372?appSharePlatform=copy

(Edited)

Show original

@korotetsky

In the 4aa version, the inner part fits much deeper into the outer part. question - how to get it out when the capacity is empty again?)

The designer has replied

@neustroew

Here’s the English translation: “The difference between the standard battery version and the rechargeable version is that the seal is tighter in the latter. Is the small component on the soap dispenser firmly in place and sitting flush against the seal?”

@neustroew

“I am willing to adjust the angle in your case if you send me a picture.”

@korotetsky

Replying to @neustroew :

I mean, I was sure both parts should be in line. but inner part is deep inside the outer one

@yoshi74

how to remove only the insert to refill ? i miss something to make it works correctly

(Edited)

The designer has replied

@neustroew

They can open the cover from the side with a screwdriver — best to destroy it.

@yoshi74

Replying to @neustroew :

thx, it works

@neustroew

Replying to @yoshi74 :

Thankyou for you Feedback

@alessandrodl

Print Profile

0.2mm layer, 2 walls, 15% infill

Really useful!!

The profile uploader has replied

Show original

@neustroew

Thankyou for you Feedback ❤️

@user_496769272

Boosted

Perfect fit. Works well, Spared me tons of time and struggle.

The designer has replied

@neustroew

Thanks, I also spent 6 hours constructively :)

Show original

@user_3214157426

I printed out the version for 4 Aa, perfect.

@user_2503802739

I am impressed. Very professional, well-thought-out, and clean construction

Show original

@Duo_3D_Print

perfect

@kzsola

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@neustroew

Thankyou

@user_2286351678

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.