Realistic WWI Anti-Tank Stick Grenade Bundle
Print Profile(4)
Description
Want more like this model? Check out these collections: Grenades | Artillery & Ammo | Life-size Weapons | Missiles & Bombs | and more (3)… |
Summary
Want a WW1/WW2 German Anti-Tank grenade replica? This is the iconic anti-tank bundled grenade that we've all seen in games, movies, shows, and more. This print is easily assembled, just screw some parts together, no glue is needed. No extra parts are needed, the entire print is 3d printed.
Filaments used
- Bambu Matte Caramel
- Polymaker Metallic Chrome (Amazon link)
- Closest Bambu filament is Metal Iron Gray Black
Assembly
1. Screw all the tops onto the hexagonal center as you see below. Be sure to match the numbers on the tops with the numbers on the hexagonal piece.
2. Next begin screwing on the bottoms in the same fashion, HOWEVER, you must follow a particular order since the parts stack. Each part has a number that you can match to a number on the hexagonal piece that it screws into.
A. First screw on 2, 4, and 6 (shown in blue below).
B. Then screw on 1, 3, and 5 (shown in green below).
C. Lastly, screw on the center piece M with the screw coming out of it (shown in orange below).
OPTIONAL: You can optionally tie some string onto the O shaped donut piece and then attach that to the V shaped notch where the wooden stick is as you see below.
3. Next, screw the two wooden stick halves together like you see below.
4. Lastly, slide the gray/black piece (shown in orange below) with the hole in it onto the threaded portion as you see below. Then screw the stick on.
Boost Me (for free)
If you enjoy my work and would like to help support my ability to share more (and even better) models in the future, please consider boosting or buying me a coffee at the link below. Your support is what helps me have enough filament and supplies to do all the print testing required for my models to be high quality and easy to assemble. It takes a mountain of test prints for each model. Thanks :-)
| Here's a link to my Buy Me a Coffee page, thanks for the support! |
( ! ) Do not sell my prints — I have not authorized selling prints. If you sell my prints on Etsy, Amazon, eBay, etc, I will find out.
This 3D print is intended for decorative purposes only and is not suitable for children. Small parts may present a choking hazard and edges may be sharp. By printing this 3D print, you assume all liability for any harm to yourself or others resulting from its use.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (55)