Giupu15

cover

IMG_6328.JPEG

IMG_6327.JPEG

IMG_6326.JPEG

IMG_6325.JPEG

IMG_6321.JPEG

IMG_6317.JPEG

Screenshot 2026-04-08 191629.png

plate_1.png

5884e47c99cde471.png

Profilo ottimizzato per massima affidabilità e rimozione immediata dei supporti.<ul><li>Dettagli Superiori: Motore Arachne attivo per rendere nitidi dettagli come fiamme e punte.</li><li>Supporti Magici: Configurazione Tree Slim (Top Z: 0.16mm / Interface: 0.2mm). Si staccano con le dita lasciando la superficie pulita.</li><li>Solidità da Gioco: 3 Pareti (Wall Loops) per rendere le miniature resistenti agli urti e alle cadute.</li><li>Sicurezza Totale: Infill Giroide (10%) e accelerazioni calibrate a 4000mm/s² per eliminare vibrazioni e collisioni del nozzle durante i viaggi tra i 4 modelli.</li><li>Adesione Garantita: Brim esterno incluso per mantenere basi e supporti saldi sul piatto per tutta la durata della stampa.</li></ul>

Profile optimized for maximum reliability and immediate support removal.<ul><li>Superior Details: Active Arachne engine to sharpen details like flames and spikes.</li><li>Magic Supports: Tree Slim configuration (Top Z: 0.16mm / Interface: 0.2mm). They detach with your fingers, leaving a clean surface.</li><li>Game Durability: 3 Walls (Wall Loops) to make the miniatures resistant to impacts and falls.</li><li>Total Safety: Gyroid (10%) infill and accelerations calibrated at 4000mm/s² to eliminate vibrations and nozzle collisions during travels between the 4 models.</li><li>Guaranteed Adhesion: Outer brim included to keep bases and supports firm on the plate for the entire duration of the print.</li></ul>

0.08mm layer, 3 walls, 10% infill

WhaleWorld

ProjPic.jpg

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>4 Elementali (Fuoco, Acqua, Terra, Aria) Miniature</h2>Condivido questo piatto pronto per la stampa contenente un fantastico party di 4 Elementali, perfetti per D&amp;D, Pathfinder o qualsiasi gioco da tavolo. I modelli sono già scalati per avere la classica basetta da 25mm (1 pollice).I Punti Forti di questo Profilo:<ul><li>Supporti Magici (Easy Removal): Ho ottimizzato i supporti Tree (Albero Sottile) con una Top Z Distance di 0.16mm e un&#39;interfaccia molto fitta (0.2mm).</li><li>Motore Arachne Attivo: Stampando con un nozzle da 0.4mm, ho attivato il generatore di pareti Arachne per catturare ogni singolo micro-dettaglio (punte di ghiaccio, fiammelle, dita) che altrimenti verrebbe perso.</li><li>Super Resistenti da Tavolo: Ho impostato 3 Wall Loops (Pareti). Le miniature sono solide e non si spezzeranno facilmente in caso di caduta accidentale durante le vostre sessioni di gioco.</li><li>Infill Sicuro al 100%: Utilizzato il riempimento Giroide (Gyroid) al 10-15%. Le linee non si incrociano mai, eliminando il rischio che il nozzle &#34;gratti&#34; sulla stampa e stacchi le miniature dal piatto.</li><li>Velocità Controllate: Ho abbassato strategicamente le accelerazioni e le velocità per le pareti esterne (Outer Wall) e gli infill sparsi. La stampante non vibrerà eccessivamente, garantendo dettagli fluidi ed evitando colpi fatali ai supporti alti.</li></ul><h3>Buona stampa e buone giocate! Se li stampate, condividete le foto delle vostre stampe (e magari anche dipinte!), mi fa sempre piacere vederle. </h3><h3>Lasciate un like se il profilo vi è stato utile! 🎲🐉</h3><h2>💥 Completa la collezione! Ho appena caricato i modelli degli altri 2 Elementali e dell&#39;Evocatore. Clicca sul link qui sotto per scaricarli e completare il set: 👉 💥 <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/it/models/2648228-summoner-elementals-extra-lightning-and-crystal#profileId-2927341">https://makerworld.com/it/models/2648228-summoner-elementals-extra-lightning-and-crystal#profileId-2927341</a></h2><h3>Vi allego le schede direttamente dal manuale dei mostri della 5e:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002635904/design/867fdfa312f269da.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002635904/design/b258e297fcc3c2db.png"></figure>

<h2>4 Elementals (Fire, Water, Earth, Air) Miniatures</h2>I'm sharing this print-ready plate containing a fantastic party of 4 Elementals, perfect for D&amp;D, Pathfinder, or any tabletop game. The models are already scaled to have the classic 25mm (1 inch) baseHighlights of this Profile:<ul><li>Magic Supports (Easy Removal): I've optimized Tree (Thin Tree) supports with a Top Z Distance of 0.16mm and a very dense interface (0.2mm)</li><li>Active Arachne Engine: Printing with a 0.4mm nozzle, I activated the Arachne wall generator to capture every single micro-detail (ice spikes, flames, fingers) that would otherwise be lost</li><li>Tabletop Super Durable: I've set 3 Wall Loops (Walls). The miniatures are solid and won't break easily in case of accidental drops during your game sessions</li><li>100% Secure Infill: Used Gyroid infill at 10-15%. The lines never cross, eliminating the risk of the nozzle &#34;scratching&#34; the print and detaching the miniatures from the plate</li><li>Controlled Speeds: I've strategically lowered accelerations and speeds for outer walls (Outer Wall) and sparse infills. The printer won't vibrate excessively, ensuring smooth details and preventing fatal knocks to tall supports</li></ul><h3>Happy printing and good gaming! If you print them, please share photos of your prints (and maybe even painted ones!), I always enjoy seeing them. </h3><h3>Leave a like if the profile was helpful to you! 🎲🐉</h3><h2>💥 Complete the collection! I've just uploaded the models for the other 2 Elementals and the Summoner. Click the link below to download them and complete the set: 👉 💥 <a target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https://makerworld.com/en/models/2648228-summoner-elementals-extra-lightning-and-crystal#profileId-2927341\">https://makerworld.com/en/models/2648228-summoner-elementals-extra-lightning-and-crystal#profileId-2927341</a></h2><h3>Here are the stat blocks directly from the 5th edition monster manual:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002635904/design/867fdfa312f269da.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002635904/design/b258e297fcc3c2db.png"></figure>

Print Profile(2)

Description

4 Elementals (Fire, Water, Earth, Air) Miniatures

Happy printing and good gaming! If you print them, please share photos of your prints (and maybe even painted ones!), I always enjoy seeing them.

Leave a like if the profile was helpful to you! 🎲🐉

💥 Complete the collection! I've just uploaded the models for the other 2 Elementals and the Summoner. Click the link below to download them and complete the set: 👉 💥 https://makerworld.com/en/models/2648228-summoner-elementals-extra-lightning-and-crystal#profileId-2927341

Here are the stat blocks directly from the 5th edition monster manual:

Comment & Rating (20)

License

Related Models