Customizable Angle Griding/Sanding Disc Holder

After doing the  Angle Grinder holder (https://makerworld.com/en/models/2580618-customizable-angle-grinder-holder-multiple-mounts#profileId-2846189) for my Multiboard (http://multiboard.io) project.   Decided I needed a place to store the grinding disks, that was easily accessible.   Figured I could also use it to store sanding Discs for the orbital sander.    So I extended the design to allow a specific number of even divisions (want to keep different grit sandpaper separate.   You can customize the size for Grinding Discs, Sanding discs, even Circular saw blades.

You can select any mount you want including a screw in.

So you can select a mount type from the following

• OpenGrid Lite (https://makerworld.com/en/models/1175037-underware-for-opengrid?from=search#profileId-1195039)
• OpenGrid Full
• Screws (#8 Flatheads).
• HSWl (https://makerworld.com/en/models/22521-honeycomb-storage-wall?from=search#profileId-27457)
• Multiboard SNAP (https://www.multiboard.io)
• Multiconnect - Multiboard (https://makerworld.com/en/models/642696-multiconnect-generic-connector-for-multiboard?from=search)
• Multiconnect - OpenGrid (https://makerworld.com/en/models/1207512-opengrid-full-lite-multiconnect-multiboard-adapter?from=search)
• Pegboard Mount (need the thin Multiboard pegboard clicks https://thangs.com/designer/Multiboard/3d-model/Pegboard%20Click%20-%20Lite%20Multipoint%20Rail%20%28Folded%29-1368649)

Also a thanx to BlackJackDuck (https://www.printables.com/model/1002471-multiboard-snap-backer-generator-parametric/files), that provided the OpenSCAD for the Multiboard Snaps.

If I missed anyone please let me know and I will update the text.

The set of parameters you can choose from.

• Inner Dia - Inner diameter (mm), how big are your grinding wheels or discs
• Inner Depth - Inner Depth from front to back (mm)
• Wall Thickness - How thick are the walls (mm)
• H Adjust - The model is a semi circle but you can lower the height by trimming the top, be careful as it can result in some weird models.
• Cutout Dia - Diameter of the cutout hole in the front, size this to your preference.
• Divisions - how many sections should the holder be divided into.

In the future, I can add a SKADIS mount.

For other items in the series and other designs check here (https://makerworld.com/en/collections/16603099-multiboard-hsw-opengrid).