Clothes Drying Rack Riser - Anti-Robot Vacuum

No more robot vacuum cleaners getting stuck in the clothes drying rack.
A small accessory, a huge improvement in your daily cleaning.

These clothes drying rack risers lift the structure just enough to allow robot vacuum cleaners to recognize it as an obstacle and automatically avoid it.
The result? No more jamming, no more blocked robots, no more manual intervention.

Compatible with any robot vacuum cleaner and any clothes drying rack thanks to the fully scalable design.

✨ Why they make a difference

• 🤖 The robot detects the clothes drying rack and avoids it
• 🚫 No more jamming or blocking during cleaning
• 🧼 Automatic cleaning without interruptions
• 🔧 Immediate installation
• 📏 Compatible with any clothes drying rack (scalable)

📐 FULLY SCALABLE — SUITABLE FOR EVERYONE

The file is designed with a base size of 10.3 mm in diameter for the clothes drying rack tube housing.

👉 Every clothes drying rack is different, but you can adapt it perfectly in seconds.

🧮 How to calculate the scale factor (IMPORTANT)

To achieve perfect compatibility, always add a 0.3 mm tolerance to your tube's diameter.

Complete formula

Scale factor (%) = ((Tube diameter + 0.3 mm) ÷ 10.3 mm) × 100

🔧 Practical examples

10 mm tube

(10 + 0.3) ÷ 10.3 × 100 = 100%

11 mm tube

(11 + 0.3) ÷ 10.3 × 100 = 110%

12 mm tube

(12 + 0.3) ÷ 10.3 × 100 = 119%

9.5 mm tube

(9.5 + 0.3) ÷ 10.3 × 100 = 95%

💡 Why add 0.3 mm

✔ Compensates for 3D printing tolerances
✔ Facilitates tube insertion
✔ Avoids overly tight fits
✔ Ensures perfect compatibility

💥 The small accessory that creates the WOW effect

Once installed, your robot vacuum cleaner:

✔ No longer gets stuck
✔ Does not attempt to climb
✔ Does not get blocked
✔ No longer requires your intervention

Print it, position it, and forget about it.

Your robot will do the rest.