Print Profile(2)
Description
Another version of the Lightbox collection with an SV Werder Bremen design.
Further versions of the Werder lamps:
If you have printed the box, you can also just print the HueForge and simply swap it.
HueForge settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x100mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm
#ffffff PLA Bambu Lab Basic Jade White Transmission Distance: 5
#3f8e43 PLA Bambu Lab Basic Mistletoe Green Transmission Distance: 1
#000000 PLA Bambu Lab Basic Black Transmission Distance: 0.6
This print uses 3 unique filaments
Swap Instructions:
Start with Jade White
At layer #15 (1.28mm) swap to Mistletoe Green
At layer #26 (2.16mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)