Pink Floyd – The Wall meets Dark Side of the Moon

Pink Floyd Diorama – The Wall meets Dark Side of the Moon (with AMS)

Experience two of the most iconic Pink Floyd album designs in a unique 3D diorama:
The legendary wall from The Wall combined with the famous prism from The Dark Side of the Moon.

This detailed diorama is perfect as a decoration, collectible, or gift for music fans.

This version has been specially adapted for printing with an AMS / multicolor system.

👉 A version without AMS support is also available:

https://makerworld.com/en/models/2841391-pink-floyd-the-wall-meets-dark-side-of-the-moon#profileId-3167679

• Combination of two legendary Pink Floyd motifs
• Clean, minimalist diorama design
• Two sizes available
• Easy to print and assemble
• Perfect as a gift for music lovers & classic rock fans

• Small: approx 100 × 70 × 46 mm
• Large: approx 250 × 175 × 70 mm

👉 Note: The large version has not been tested yet – feedback & photos are highly appreciated!

1. Glue the prism onto the inner base
2. Let it dry
3. Carefully attach the wall (lid)

💡 Tip: Use very little glue – less is more!

The model consists of three build plates:

• Box
  • No support required
  • Recommended layer height: 0.2 mm
• Wall (Lid)
  • Support required
  • Recommended layer height: 0.08 mm (for finer details)
• Prism
  • No support required
  • Recommended layer height: 0.08 mm (for finer details)

• Pink Floyd fans
• Music lovers
• Diorama and miniature collectors
• Stylish room decoration
• Gift ideas

Pink Floyd Diorama – The Wall meets The Dark Side of the Moon

Experience two of the most iconic Pink Floyd album designs in one unique 3D diorama:
The legendary wall from The Wall combined with the famous prism from The Dark Side of the Moon.

This detailed diorama is perfect as a decoration, collectible, or gift for music fans.

🔧 Features

• Combination of two legendary Pink Floyd motifs
• Clean and minimalist diorama design
• Available in two sizes
• Easy to print and assemble
• Perfect gift for music lovers & classic rock fans

📏 Sizes

• Small: approx. 100 × 70 × 46 mm
• Large: approx. 250 × 175 × 70 mm

👉 Note: The large version has not been tested yet – feedback and photos are highly appreciated!

🛠️ Assembly

1. Glue the prism onto the inner base
2. Let it dry
3. Carefully attach the wall (lid)

💡 Tip: Use very little glue – less is more!

🖨️ Printing Information

The model consists of three build plates:

• Box
  • No support required
  • Recommended layer height: 0.2 mm
• Wall (Lid)
  • Support required
  • Recommended layer height: 0.2 mm
• Prism
  • No support required
  • Recommended layer height: 0.08 mm (for finer details)

🎵 Perfect for

• Pink Floyd fans
• Music lovers
• Diorama and miniature collectors
• Stylish home decoration
• Gift ideas