Project Hail Mary Lithophane CMYK

Project Hail Mary Lithophane

Bring the incredible journey of Project Hail Mary to life with this highly detailed lithophane! This model is perfectly sized (144 mm x 108 mm) to fit seamlessly into the standard Bambu Lab lithophane frame.

To achieve the best possible results and stunning image quality, please read the following printing instructions carefully before slicing.

⚠️ Important Printing Instructions

• ⚠️Please make sure my custom “*CMYK 0,8” Profil is selected⚠️
• 0.2 mm Nozzle Required: This model has been strictly optimized for a 0.2 mm nozzle to capture the finest details. Please do not use a standard 0.4 mm nozzle.
• Do Not Alter Layer Height: The provided print profile is perfectly tuned for this specific lithophane. Changing the layer height will disrupt the light transmission and ruin the final image.
• Keep the Brim Enabled: Due to the long printing time and the thin geometry of lithophanes, warping can easily occur. It is highly recommended to leave the brim activated to ensure secure bed adhesion throughout the entire process.
• Print Time: Be prepared for a long print! The incredibly low layer height is necessary to achieve high-resolution details, which naturally extends the printing time. Patience is required, but the final result is absolutely worth the wait.

📊 Technical Specifications

• Dimensions: 144 mm (Width) x 108 mm (Height) — Compatible with the Bambu Lab standard frame
• Lithophane Resolution: 0.2
• Colored Resolution: 0.44 mm
• Layer Height: 0.05 mm
• First Layer Height: 0.15 mm
• Minimum Thickness: 0.8 mm
• Maximum Thickness: 2.7 mm

💬 Questions & Custom Requests

Happy printing! If you have any questions or special requests, please feel free to leave a comment or send me a DM.

Looking for a specific image? I also take requests for custom lithophanes! Just reach out to me, and I will create them for free and upload them here to MakerWorld. I would also love to see how your prints turn out, so please share your makes in the comments!