Name of The Wind 50mm by 150mm Bookmark
Print Profile(1)
Description
My models on MakerWorld are for personal use only. Redistribution, resale of files, or sales of physical prints are not allowed.
If you’re interested in selling physical prints, you can obtain a commercial license through my Patreon: https://www.patreon.com/cw/MythicHues
Boost Me (for free)
If you enjoy our models and would like to see more, please consider following us, liking our models, and, if you're feeling generous, giving us a Boost! it really does make a huge difference in us continuing what we do!
📚 The Name of the Wind Bookmark 📚
I worked to capture the atmosphere and color tones of the original cover while keeping everything clean and printable. This one came together really nicely and fits perfectly alongside the rest of the set.
🔹 Optimized for easy printing
🔹 Sized perfectly for a standard 50mm x 150mm bookmark
Want the full set? 👀
The other two bookmarks in this series are available exclusively on our Patreon.
If you enjoy the design, don’t forget to like, comment, and boost—it really helps us out! 🙌
Project: name of the wind 5C.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.04x150.03mm in size
You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2mm and the Actual Thickness is 2mm
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Dark Blue
At layer #9 (0.8mm) swap to Cyan
At layer #11 (0.96mm) swap to Turquoise
At layer #13 (1.12mm) swap to Jade White for the rest.
All photos shown are of the actual printed Hueforge design. If you use the same filaments and colors, your print should match the results you see here.
The included .3mf file is AMS-ready—already set up with height range modifiers and prepared layers so you can simply slice and print.
If you prefer using the STL file, be sure to:
- Apply color swaps at the correct mm heights
- Follow the provided instructions for height modifications and infill
During slicing, you may see an error about “floating regions”—this can be safely ignored.
⚠️ Important: If you scale the design, do not adjust the Z axis.
Happy printing! 🎨✨
Pictured frame, stand, or puzzle box are by Canadian Gamer and can be found in his Frames and Functional items here: https://makerworld.com/@CanadianGamer/collections/1027330
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)