Oral B Braun Charger Wall Mount - V2 Japandi style - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Moo Ideae

Household>Other House Models

IP Report

Print Profile(2)

All

P1S

H2D

H2S

H2C

A1 mini

X1E

X1 Carbon

X2D

P1P

P2S

H2D Pro

A2L

V2 – Japandi Edition (Improved Fit)

Designer

5.9 h

1 plate

4.7(3)

V1 - 0.2mm layer, 2 walls, 15% infill

Designer

5.1 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Bill of Materials

Bambu Filaments

Select all

PLA Matte

Description

I remixed the remix of the remix mainly to add a passive (non-charging) holder for a second toothbrush. I also added a modifier for the plug area for added strenght using honeycomb infill pattern. No screws needed, it's a single part print!

V2 – Improved Fit & Japandi Style

Refined ironing settings, now applied only where needed for a smoother top surface without increasing print time.
Improved plug tolerance for a perfect, tight fit.
New Japandi-inspired design with deeper vertical lines and a dynamic diagonal wave base for a more premium effect.
Now compatible with French socket! (Type F)

Comment & Rating (17)

@Cortex89

Boosted

Print Profile

V2 – Japandi Edition (Improved Fit)

perfect!!! great project 🔝

The profile uploader has replied

Show original

@danieleparazza

Thank you for the rating and the boost

(Edited)

Show original

@user_4265078552

Print Profile

V1 - 0.2mm layer, 2 walls, 15% infill

Great solution!

(Edited)

The profile uploader has replied

@danieleparazza

hi, sorry what’s the issue? this is a print profile for the double toothbrush holder thing. I’ll be happy to help if you need anything specific :)

@user_4265078552

Replying to @danieleparazza :

Sorry my bad. That comment was not at all on this eminent model. It was meant for the app itself and my inability to fetch model and version of my own printer. The fact that I accidentally started a chat here just proves my point on how unfinished the app itself is. again, thanks a little for you great work in this toothbrush model!!!

@user_4265078552

Replying to @user_4265078552 :

Correction of autocorrect: thanks a LOT for this fine model!

@user_1455603638

Print Profile

V2 – Japandi Edition (Improved Fit)

the design is nice and came out cleanly, however it is not compatible with Belgian plug standard

(Edited)

The profile uploader has replied

@danieleparazza

Thank you for your feedback. Yes, as you can tell from the pictures the plug was designed for socket Type F ("German"). I'll look into adding the compatibility for socket Type E ("French")

@danieleparazza

Hey, I updated the V2 print profile to add the earth hole. I'd appreciate if you give it a try as I don't have a type F socket available to fit-test

@user_1455603638

Amazing! Thank you for adding this and so quickly. I am new to the hoppy one of the first prints so this was an oversight from my part. nothing a drill couldn’t solve, so no need for a reprint. 😅

@user_2784823875

Print Profile

V2 – Japandi Edition (Improved Fit)

the outlet for the plug was just a bit too small. with a little bit of filing it fit perfectly

The profile uploader has replied

Show original

@danieleparazza

thank you for the rating. maybe there was a little support residue? It always difficult to make something compatible for all the possible producion batches and variations. are you able to share a picture of your charger just to check?

@user_2784823875

i am quite new to the 3d printing world. s that could be the case. this was my first real print. thanks for reaching out. (but really happy with the print though!!)

(Edited)

@OlliCastle

Would it be possible to remake it to fit 2 Chargers and putting the wallplug socket in the middle of the back to balance the weight?

The designer has replied

@danieleparazza

If you want to have a single plug for two chargers it’ll need an electrical work (totally feasible but given that the toothbrush battery lasts few days without charging it’s easier and safer to just swap positions from time to time). A safer solution could be to have two plugs, one for each charger. This would work but I expect a lot of variability on different wall sockets positioning. Also I don’t think there’s a lot of bathrooms with double schuko sockets. Let me know what your socket looks like

@user_4265078552

I love this one. I just need to mirror it because our wall-connector is close to a corner on the lefthand side.

No more

This remix is based on

Oral B Braun Charger Wall Mount Holding Thing

part0

License

This work is licensed under a Standard Digital File License – Community Use (SDFL‑C).

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.

Related Models

Oral B Braun Charger Wall Mount Holding Thing

part0

4.9 k

828

IKEA Skadis Wall Mount

AU3D

31.9 k

9.9 k

Wall Hook | Coat Hanger | Towel Rack

yekta

29.4 k

8 k

Christmas Reindeer

SabreDesign

30.3 k

8.1 k