Desktop Trash Can with Tilting Lid 9x17cm

Desktop trash can with tilting lid V2 90x170mm

Continuing with the tilting lid trash can series, this time I present a completely new model capable of making better use of the space in your work area.

Features:

• Design.- Its low-contrast rectangular design allows it to be placed within our workspaces without attracting attention.
• Size.-  The assembled dimensions of the model are 170mm x 90mm with a height of 250mm.                
• Capacity.- It is designed to only store trash in its bottom container, having a capacity of 2.5L.
• Tilting lid.- The tilting lid has been tested for good functionality and can tilt with minimal pressure. Remember to use an infill of 15 to 18%.
• Durability.- The design is meant to be durable. Although it can withstand drops or bumps, it's best not to experience them.
• Hygiene.- It is recommended to use a plastic bag in the bottom container for easy trash disposal. It is also advisable not to dispose of food waste inside it, as bacteria can easily proliferate between the layer joints.
• Efficient Design.- The model has been designed to use the minimum amount of filament, avoiding the use of supports and reducing printing times.

Printing characteristics:

Recommended Filament: PETG (PLA at your own risk).

Tolerance: 0.2mm

Walls 3 

Infill 18%.

Supports NO.

ASSEMBLY

1)  First, place the tilting lid at 90 degrees inside the top lid. 

2) Second, locate one of the tabs inside the hole.

3) Third, push carefully until the second tab clicks into place in the hole.

4) Fourth, repeat the process with the second tilting lid.

NOTE: be careful with the protrusions that prevent the lids from tilting upwards.

Assembly and Disassembly for emptying trash

For easy and effortless opening, grasp the points at the ends of one side and pull gently.

for assembly, simply push carefully inwards.