Nerf Jolt Slide Pro /w Nerf Attachment Rail

This model requires 2 (Two) M3x12 Screws to assemble. 

Looking for a version that DOES NOT require screws? Check out this model: https://makerworld.com/en/models/2352283-nerf-jolt-pistol-slide-w-nerf-attachment-rail#profileId-2572685

This is a remixed version of my Nerf Jolt Slide /w Attachment Rail, which, just like the model before, adds a Nerf Attachment Rail and a Nerf Strap Adapter (not guaranteed to work with every strap) on the back of the slide which now has a spot for an M3x12 Screw on both sides to secure the back to allow for the use of a strap. The slip-on notch pieces are replaced by Alignment Asist nubs. This model is essentially an upgraded version of the original.

To assemble:

1. Remove Supports (be careful when doing so)
2. Insert Nerf Jolt
3. Line up M3x12 Screw-Ins on Left and Right Sides
4. Screw in M3x12s

Remixed Model by 3rd Dimensional Printing (me)

My Page: https://makerworld.com/en/@randomdragon999

Model: https://makerworld.com/en/models/2352283-nerf-jolt-pistol-slide-w-nerf-attachment-rail#profileId-2572685

Original Model by Jack Spollen.

Original Creator's Page: https://makerworld.com/en/@JackSpollen

Model: https://makerworld.com/en/models/1902524-nerf-jolt-pistol-slide?from=search#profileId-2039225

Please print this model in BRIGHT colors such as Orange, Blue, Yellow, or Green to differentiate it from a real weapon. I take NO responsibility for any consequences of printing this in a color that might mistake this for a real weapon. You have been WARNED.

I highly suggest PLA Basic Orange, as most blasters include this color. You can purchase a 1kg Refill of Orange PLA Basic through the link in the Bill of Materials (BOM).