Miniature lamp with magnetic activation
Print Profile(4)
Bill of Materials
Description
Update: I have created a new matching ceiling lamp with a diameter of 35 mm that works with the same system as the previous one. You need to print the diffuser in vase mode, similar to the previous model, and use double-sided tape to attach it to your dollhouse ceiling
Add a touch of realism and warmth to your dollhouses or dioramas with this Mini LED Lamp. Meticulously designed, it combines an elegant aesthetic finish with an "invisible" magnetic activation system
✨ Main Features
• Realistic Scale: Perfect dimensions of 45 mm in height and 25 mm in diameter, ideal for standard dollhouses
• Magical Activation: Forget about unsightly switches. The lamp is activated simply by bringing a magnet close to the base
• Detailed Design: Base with sun engraving and texture optimized for Matte filaments (PLA Matte)
• Fast Printing: No supports needed, designed for clean and simple printing
🛠️ Technical Specifications
• Recommended material: * Base: PLA Matte (earth tones, wood, or pastel colors)
• Lampshade: White PLA for soft light diffusion
• Required electronics:
• 1x 3V LED with magnetic control (White or warm) with 18 mm diameter and 6.5 mm height
https://eu.store.bambulab.com/products/y-shape-led-light-with-magnetic-control-switch?id=49273025560924
📦 Assembly Instructions
1. Printing: Use a layer height of 0.12mm to properly capture the sun detail on the base and manually add diffuse skin to the base in the slicer to keep the engraved icon on the base visible
2. Electronics: Insert the LED into the top of the base, orienting the magnetic sensor towards the side engraved with the sun logo of the base
3. Closure: Cut the two tabs to separate the base from the white lampshade, then press it onto the lamp base; it does not require glue if your printer is well calibrated
4. Enjoy!: Place a small magnet in your doll's hand or under the table to turn on the light when brought close
5. To turn the lamp on and off, bring the magnet close to the lampshade on the side marked with the sun logo, and it will light up. Bring it close again to switch between different light modes and turn it off (as shown in the GIF)
If you like this model, please give it a ❤️ and share your print in the "Makes" section. I would love to see how it illuminates your miniatures
Designed for the detail-loving Maker community
Boost Me (for free)
If you are interested in other models of magnetic-activated lamps, let me know in the comments and we'll try to design them
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)