Cap Gun Trip Wire - TRP-1
Print Profile(1)
Description
This is a more compact and cheaper version of my other trip wire alarm: https://makerworld.com/en/models/2524640-trip-wire-cap-gun-alarm-trp-8
The TRP-1 is a compact tripwire alarm system designed for outdoor safety. Using a singular cap from common cap guns, it produces a loud bang when triggered. Ideal for camping or securing outdoor areas, the TRP-1 alerts you instantly to potential intruders, providing peace of mind.
Non-printed part:
-2 rubber bands
-Cap gun cap
-Wire/string
Assembly:
- Insert the striker into the hole in the frame (you will have to bend it a bit to get it in).
- Move the striker up into the firing position so the holes line up then put the pin through.
- Insert a cap into the hole on the bottom of the frame.
- Place 2 rubber bands over the striker with each of them looped separate on the bottom of the frame inside the notches.
- Secure the trip wire onto a solid object using string or whatever you have. Make sure the protruding bumps are facing towards the object to prevent the rubber bands from getting caught.
- Connect a wire/string to the pin and run it tight between an area you want to secure.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (47)