Valorant: Killjoy's Turret
Print Profile(2)
Description
One of Killjoy's exclusive abilities in Valorant: Turret
The model is made based on the in-game design, restoring every part and every engraved line as much as possible
No Bambu Lab AMS required, no post-painting required, no additional hardware required Including the chick's expression, all parts are separated by color and assembled after single-color printing Assembly only requires super glue (a rubber mallet is recommended for assistance)
- The cannon supports rotation and pitch The pitching part is specifically designed with a detent ratchet structure, providing clearer feedback when adjusting the angle and a more mechanical feel
The finished size is 35cm, with a ratio of approximately 1:2.5 Supports A1 mini
Intuitive dimensions, 3D Printer is P2s
About filament
PLA Basic Light Gray (10104)
PLA Basic Dark Gray (10105)
PLA Basic Blue Gray (10602)
PLA Basic Black (10101)
PLA Basic Orange (10300)
PLA Basic Warm Yellow (10402)
PLA Basic Cyan (10603)
About assembly
Please refer to the attached document - Assembly Guide
It is recommended to watch the assembly video below ⬇️
Update log
2026/4/9 Added a foolproof design between the hip and thigh to minimize incorrect left and right leg orientation Adjusted the tolerances of individual parts
2026/4/10 Optimized the chick's head printing — changed the printing direction to achieve higher printing quality with more supports
2026/4/11 Increased the tolerance of the square positioning tenon by 0.2mm to reduce assembly issues caused by printing overhangs
A quick reminder: good bed adhesion is essential for a successful print.
Make sure your material and temperature settings are correct, and clean the build plate regularly.
Bambu Lab Liquid Glue for Build Plate is a great way to ensure reliable results.
Boost Me (for free)
My design philosophy is simplicity and ease of printing. Every model has been test-printed at least twice, and all photos are of the actual printed results. If you encounter any issues, feel free to leave a comment or send me a message anytime. If you like the model, a bit of encouragement would mean a lot—thank you!😽😽😽
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)