Triple Deep Hole Marker – Cap Lock Wall Mount

🚀 Triple Deep Hole Marker Wall Holder – Cap Lock System

Three markers. Instant access. No cap hassle.

Keep your 45 mm deep hole markers organized and always ready for use with this triple wall holder featuring an integrated cap-lock system.

The holder is designed for fast and ergonomic access at your main workstation. Simply pull the marker, make your mark, and place it back — without removing the cap each time.

Perfect for busy workshops where speed and efficiency matter.

⚡ Integrated Cap-Lock System

The holder keeps the caps securely locked in place, allowing you to remove the marker instantly and start marking.

• Pull the marker without the cap
• Mark your workpiece
• Insert the marker back into the holder

No more constantly removing and replacing caps during repetitive marking tasks.

🔄 Quick Release When Needed

If you want to take the marker with the cap:

Simply rotate the marker slightly and it is released from the cap-lock position.

This gives you the flexibility to either:

• Use the marker quickly at the workstation
• Or take it with you when needed

🧰 Designed for Efficient Workflow

This holder is especially useful when mounted close to your main workspace.

The ergonomic position allows you to:

• Grab a marker instantly
• Mark your material
• Place it back in one quick motion

A small improvement that makes everyday workshop tasks faster.

🔧 Two Mounting Options

🔩 Screw-Mount Version

Designed for direct mounting to walls, workbenches, or tool boards.

Simple, stable, and reliable.

🧱 French Cleat Version

Perfect for modular workshop walls.

Easy to mount and reposition whenever your workshop layout changes.

⚡ Why You’ll Love It

• Storage for three 45 mm deep hole markers
• Integrated cap-lock system
• Instant access for fast marking
• Markers can still be removed with caps
• Perfect for frequently used tools
• Compact and efficient workshop organization

A practical upgrade for any workshop where marking tools are used constantly.

🖨 Print Profile Information

This model is optimized for easy and reliable printing.

Printing

• Supports: required
• Orientation: Print as provided in the file

🧵 Recommended Materials

Tested successfully with:

• PLA (recommended)

Also compatible with:

• PETG
• ABS
• ASA
• PLA+

⚠️ TPU is not recommended, as flexible materials reduce the locking function.

⚙ Suggested Print Settings

• Layer height: 0.2 mm
• Infill: 15–25 %
• Walls: 2 perimeters
• Nozzle: 0.4 mm
• Standard print speed

For heavy workshop use, increasing infill to 30 % is recommended.