Print Profile(1)
Description
Boost Me (for free)
Please boost me so I can create mode models like this for you! HappyPrinting!
Perfect For:
Religious décor or spiritual spaces
Easter and Christian holiday displays
Meaningful gifts or keepsakes
Painting projects with detailed finishes
Join my Patreon for commercial license and to learn how to achieve this effect in 5 min or less:
https://www.patreon.com/posts/how-to-quickly-154811999
My New Metallic Sculpture collection:
https://makerworld.com/en/collections/23924034-metalic-sculptures
More sculptures:
https://makerworld.com/en/collections/9605699-sculptures
Print Instructions for Best Results
1. Clean the build plate thoroughly with dish soap until it “squeaks” under your finger.
2. Allow the model and build plate to cool completely to room temperature (about 30 minutes).
3. Do not remove the print by pulling or yanking the model.
4. Instead, remove the build plate and gently flex it—the model (with supports) should release on its own.
5. Use 3D cutters to remove supports for a cleaner and easier finish. (They’re inexpensive and well worth it.)
6. Do not remove supports immediately after printing—they are still hot and may not detach cleanly. Let them cool fully; they will come off much more easily.
7. For PETG and ABS prints, use Elmer’s glue stick.
Happy Printing
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)